uPVC Cladding for Gables, Dormers and Porches

Cladding covers the parts of the roofline that are hardest to keep painted, and done properly it protects the timber behind for years.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

uPVC roofline cladding is a maintenance free covering fitted over the timber of gable ends, dormer cheeks, porch edges and similar areas, usually colour matched to the fascias, soffits and guttering. It suits homes where those parts have needed repeated painting or repair, as long as the timber and structure behind are sound or put right first.

Cladding is a finish, not a repair. The most important part of the job is what happens before it goes on.

Where cladding is used on a roofline

  • Dormer cheeks: the vertical sides of a dormer window
  • Gable ends and the area under the bargeboards
  • Porch and bay window edges
  • Box ends where fascias turn the corner

Check the timber first

Painted boards on dormers and gables often hide rot behind a sound looking surface. Before cladding, we remove or open up enough of the old finish to check the timber. Soft sections are replaced and any leaks around the dormer, such as failed lead at the cheeks or a split flat roof above, are fixed first.

Cladding over wet or rotten timber traps the moisture and hides the problem until it is much bigger, so we will not do it.

How it is fitted

Battens are fixed to give a flat, ventilated base. The cladding boards are then fitted with the right trims at corners, window reveals and junctions with the roof, so water is shed rather than drawn behind. Joints are kept to a minimum and positioned where they are least visible.

Colour and matching

We match cladding to your fascias, soffits and guttering, so a dormer or gable does not look like a patch added later. If the rest of the roofline is due for renewal, doing it at the same time gives a consistent finish and one set of access.

Cladding and dormer leaks

Many dormer leaks are blamed on the window when the real cause is the lead at the cheeks or the flat roof above. If you have damp around a dormer, it is worth having the source traced before any cladding is chosen, so the new finish goes onto a dry, sound structure.

When cladding is not the answer

Cladding is not a fix for a structural or damp problem. If a dormer is leaking, if timbers are rotten through or if there is movement in a gable wall, those need dealing with first. We will also tell you if cladding would look out of place, for example on some period homes where painted timber is the better choice.

Where cladding does suit, it removes one of the most awkward painting jobs on a house and protects the timber from the weather for years.

Cleaning and care

uPVC cladding only needs an occasional wash with warm soapy water. Avoid pressure washers close up and strong solvents, which can mark the surface. When your gutters are being cleaned, it is a good moment to look along the cladding and trims for anything that has come loose.

Doing cladding with other roofline work

Cladding is usually part of a wider roofline job rather than a job on its own. Dormers often need their flat roof, lead cheeks and fascias looking at in the same visit, and gable cladding sits next to bargeboards and verges. Planning them together means the access is set up once, the finishes match and each part is fitted in the right order so water always laps over a joint rather than into it. We will tell you what genuinely needs doing now and what can wait, so the work is sized to your home rather than padded out.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

Does uPVC cladding need painting?

No. It does not rot and only needs an occasional wash.

Can cladding go straight over old timber?

Only if the timber is sound. We check first and replace anything soft, because cladding over rot traps the damp.

Can you clad a dormer?

Yes. We clad dormer cheeks and fronts, and check the lead and flat roof around the dormer at the same time.

Will it match my fascias and soffits?

Yes. We colour match cladding to your fascias, soffits and guttering.

Which areas do you cover?

Homes across Swansea and Neath Port Talbot in West Glamorgan.

Related services