Bargeboard Replacement: Process and Cost Factors

Bargeboards take the weather from two directions, so they are usually the first part of the roofline to rot.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

Bargeboard replacement means removing the boards along the sloping edge of a gable roof, checking the timber and the verge behind them, and fitting new boards, usually in maintenance free uPVC colour matched to the fascias and soffits. The cost depends mainly on the length and height of the gable, access, the condition of the timber behind and whether the verge needs work at the same time.

Left too long, rotten bargeboards let water into the ends of the roof timbers and the verge mortar, which turns a simple roofline job into a roof repair.

Whether you spell it bargeboard or barge board replacement, the job is the same: the board on the gable edge comes off, the timber and verge behind it are checked and repaired where needed, and a new board goes on.

Signs your bargeboards need replacing

  • Flaking or blistered paint that keeps coming back
  • Soft timber you can press a screwdriver into
  • Boards that have split, warped or pulled away from the wall
  • Gaps at the top where birds or insects are getting in
  • Mortar falling from the verge above the board

What affects bargeboard replacement cost

There is no single price for bargeboards, because the job changes with the house. The length and height of each gable set the starting point: a short verge on a bungalow is quick to reach, while a tall gable on a three storey house usually needs scaffold, and access can cost more than the boards themselves.

Material matters too. Timber boards are cut, primed and painted on site, while uPVC arrives finished and colour matched. What we find behind the old boards can change the job: if rafter ends or verge timbers have rotted, they are cut back and renewed before anything new goes on.

Doing the fascias and soffits at the same time shares the access across the whole roofline, which is usually better value than separate visits. Our bargeboards and cladding page covers the work in more detail.

Timber or uPVC

Painted timber can look right on older and period homes, but it needs regular repainting to last. Most owners choose uPVC because it does not rot or need painting. We fit uPVC bargeboards and cladding colour matched to your fascias, soffits and guttering, so the whole roofline reads as one job.

What happens on the day

We set up safe access to the gable, remove the old boards and look at what is behind them. Sound timber is kept. Rotten ends of rafters or supporting timber are repaired before anything new goes on, because covering rot with a new board only hides it.

The new boards are fixed, joints and ends are finished neatly, and we check the verge where the tiles or slates meet the board. If the verge mortar has failed, it is sensible to deal with it at the same time while access is in place.

What sets the cost

We do not publish a fixed price, because gables vary so much. These are the things that move it.

  • The length and number of gables
  • Height and access, including whether scaffolding is needed
  • The condition of the timber behind the old boards
  • Whether the verge mortar or dry verge needs renewing
  • Whether fascias, soffits or guttering are done in the same visit

Doing the whole roofline at once

If the bargeboards have rotted, the fascias and soffits on the same house are often not far behind. Doing them together means one set of access, a matching finish and usually a lower total than separate visits. We will tell you honestly if the rest of the roofline still has years left.

Our fascias and soffits page explains how the rest of the roofline is replaced alongside the bargeboards.

Why bargeboards rot first

A bargeboard sits on the most exposed edge of the roof. Rain is driven against its face by the wind and runs down its top edge from the roof, so it gets wet from two sides and often dries slowly in the shade of the gable. Paint that cracks lets water into the grain, and once the end grain is wet, rot spreads along the board quickly.

That is also why bargeboards are worth checking whenever the verge or the tiles at the gable edge are being looked at. Water getting past a failed verge soaks straight into the top of the board.

Dry verge and mortar verge

At the gable edge the tiles or slates are finished either with mortar bedded onto the bargeboard side or with a dry verge system of interlocking caps. Mortar verges crack and fall out over time, especially where the board behind has moved or rotted. A dry verge system clips into place without relying on mortar, needs little upkeep and is a common upgrade when bargeboards are renewed. We explain both options and let you choose, since some older homes suit the traditional look better. Doing the verge while access is already in place avoids paying for it twice.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

Can bargeboards be capped instead of replaced?

Capping covers the old board with uPVC. It only makes sense if the timber underneath is completely sound; over rot it traps the problem.

Do you replace bargeboards on their own?

Yes. We can replace just the bargeboards, or do them with the fascias, soffits and guttering.

Do I need scaffolding for bargeboards?

It depends on the height of the gable and access. We tell you at the free inspection.

Is the work guaranteed?

Yes. Our work comes with a written guarantee.

How much does barge board replacement cost?

It depends on the length and number of gables, the height and whether scaffolding is needed, the condition of the timber behind the old boards, whether the verge needs renewing and whether the fascias, soffits or guttering are done at the same time. We give you a fixed price in writing after a free inspection.

What is a bargeboard on a house?

A bargeboard is the board fixed along the sloping edge of a gable roof, where the roof overhangs the end wall. It protects the ends of the roof timbers from the weather and finishes the verge where the tiles or slates meet the gable.

Related services