Flat roof skylight and roof lantern installation, plus skylight replacement, with upstands sealed into the roof. Free inspection. Call 07476 888638.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
A flat roof skylight brings daylight into an extension, kitchen or garage room where a wall window is not possible. Fixed rooflights, opening units and roof lanterns all need a properly built upstand, a weatherproof joint with the flat roof covering and a structure that can carry them.
We look at the room below, the roof structure and the existing flat roof covering before recommending a unit. The opening is set out, framed and trimmed, then an upstand is built so the glazing sits above the water running across the roof. The covering is dressed up the upstand and sealed, the unit is fixed to it and the inside reveal is left ready for finishing.
A roof window in a pitched roof sits in the plane of the tiles or slates and relies on a flashing kit that laps under and over the covering. That work is covered on our Velux and skylight installation page. A flat roof skylight works differently: water does not run off quickly, so the unit has to sit on a raised kerb, or upstand, and the roof covering has to turn up and seal against it.
Most of the faults seen with flat rooflights come from that junction rather than the glass. A low upstand, a covering that stops short or a sealant joint doing the job of a proper detail can let water in long before the unit itself wears out.
A flat rooflight is a single glazed unit, fixed or opening, that sits low on its upstand. It suits small rooms, landings over an extension and garage conversions where you want light without a raised feature on the roof. Opening versions add ventilation, which helps in kitchens and bathrooms.
A roof lantern is a pitched glazed structure, usually rectangular, that rises above the roof and gives a larger, brighter opening. Roof lantern installation is a bigger job: the opening is wider, the frame is heavier and the upstand has to be square and level for the lantern to seat correctly. Room size, ceiling height, what you see from neighbouring windows and how much heat and glare you want all affect the choice.
Skylight replacement makes sense when a unit has misted between the panes, cracked, discoloured or keeps leaking at its seals. Before replacing it, check whether the problem is the unit or the roof around it. If the covering is split or the upstand timber is soft, a new unit on the old detail will not solve the leak.
Replacing a skylight is often a good time to look at the whole flat roof. If the covering is near the end of its life, fitting a new rooflight into it and then reroofing later means disturbing the same junction twice. Our flat roofs page explains repair and replacement options, including EPDM rubber roofing and GRP fibreglass roofing.
The main factors are the size and type of unit, whether a new opening has to be cut and framed, the condition and type of flat roof covering, access to the roof and the finishing needed inside. Fitting into a new roof during reroofing is usually simpler than cutting into an existing one. A lantern costs more to fit than a small fixed rooflight because of its size and weight.
Building Regulations can apply to new openings and to changes in a roof structure, so check what is needed for your property before work starts. When comparing quotes, ask how the upstand will be built, how the covering will be sealed to it and whether making good inside is included.
The opening is marked out, cut and framed in the roof structure, an upstand is built around it, the flat roof covering is dressed up and sealed to the upstand, and the unit is fixed on top. The inside reveal is then left ready for plastering or finishing.
A single rooflight into a sound flat roof is usually a short job, while a large roof lantern or a skylight fitted as part of a reroof takes longer. The timeline depends on the size of the opening, the roof covering and access, and is set out in the written quote.
The size and type of unit, whether a new opening needs cutting and framing, the type and condition of the roof covering, access and the internal finishing all affect the price. A free inspection lets us quote for the actual roof.
A flat rooflight suits smaller rooms and keeps a low profile on the roof. A roof lantern gives a larger, brighter opening and suits bigger extensions and kitchens. Room size, ventilation needs and how the roof looks from outside usually decide it.
Tell us about your roofing job and we'll get back to you as soon as possible.