The boards at the edge of the roof carry the guttering and close off the eaves. Both jobs matter.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
The fascia is the board along the eaves that the guttering is fixed to. The soffit is the horizontal board underneath, closing off the gap between the wall and the roof edge. Bargeboards do the equivalent job at a gable end.
They are easy to overlook until the guttering starts to sag or birds get into the eaves.
Beyond appearance, the fascia provides the fixing for rainwater goods and protects the exposed ends of the rafters. The soffit closes the eaves against birds and weather while — importantly — allowing ventilation into the loft through vents or a ventilated profile.
Peeling paint and dark staining under the gutter line are the first signs on timber. Press the board: if it gives, the timber has gone. Sagging guttering, gaps at the eaves and evidence of birds nesting all point the same way.
uPVC removes the repainting cycle and is the usual choice on modern housing. On period and conservation properties, timber may be required or simply more appropriate. Whichever is used, the critical detail is retaining eaves ventilation — capping over rotten timber without addressing airflow creates a condensation problem in the loft.
Tell us about your roofing job and we'll get back to you as soon as possible.
Capping is sometimes offered as a cheaper option, but it hides decayed timber rather than removing it. We recommend full replacement where the timber has failed.
Usually yes. The guttering has to come off to replace the fascia, so refitting old rainwater goods to new boards rarely makes sense.
It can, which is why ventilated soffit profiles or eaves vents should be specified as part of the work.
Covering Swansea, Neath Port Talbot and West Glamorgan.