Lean-to Roof Replacement and Repair

Lean-to roofs on extensions and outbuildings repaired and replaced across West Glamorgan: EPDM, GRP and felt. Free inspection. Call 07476 888638.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

Lean-to Roof Replacement

Lean-to roofs on extensions, outbuildings and side returns are usually the first roof on the house to fail, because many were built with basic felt and minimal fall. Johnson's Roofing repairs and replaces lean-to roofs across Swansea and Neath Port Talbot with modern coverings and proper drainage.

What the work covers

  • Lean-to roof repairs and leak tracing
  • Full lean-to roof replacement
  • EPDM rubber, GRP fibreglass and felt coverings
  • Extension, outbuilding and side return roofs
  • Falls corrected so water drains properly
  • Flashing renewal where the lean-to meets the house wall
  • Guttering and downpipe renewal
  • Written workmanship guarantee

How we work

We inspect the lean-to, checking the covering, the fall, the wall flashing and the deck. You get a written quote before work is booked. Replacement usually means stripping the old covering, renewing any soft decking, correcting the fall if needed, and fitting the new covering with fresh flashing and guttering.

Why lean-to roofs fail early

A lean-to has one slope and one wall junction, and both work against it. The slope is often too shallow for the covering originally used, so water moves slowly and finds every weak seam. The wall junction depends entirely on the flashing, and where that flashing was chased into render rather than into the brickwork, it pulls away as the building moves.

When we replace a lean-to roof we set proper falls to the gutter, chase the flashing into the wall correctly, and fit a covering that suits the shallow pitch, so the same problems do not come back.

Repair or replace

A single failed flashing or a split seam on an otherwise sound roof is worth repairing. A lean-to with cracked felt across the whole slope, or a deck that gives underfoot, is not. We will tell you honestly which you have, and the written quote will show exactly what is included either way.

Common questions

Why does my lean-to roof keep leaking?

The two usual causes are the flashing where the lean-to meets the house wall, and a fall so shallow that water sits on the covering instead of draining. We check both before recommending a repair or replacement.

What is the best covering for a lean-to roof?

For most lean-to roofs we recommend EPDM rubber: one piece, no seams, and it tolerates standing water. GRP fibreglass suits roofs that get walked on, and high-performance felt is the budget option with a shorter life.

Can you replace a lean-to roof on an extension?

Yes. Extension lean-tos are one of the most common jobs we do. If the room below is cold as well, we can add insulation above the deck at the same time, which is explained on our warm roof flat roofing page.

How much does a lean-to roof cost?

It depends on the size, the covering, whether the fall or deck needs work and how the flashing is detailed. We inspect first and give you a written, itemised quote.

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage