Lead roofing for bays, canopies and small flat roofs. Covering, timber support, movement and drainage details assessed. Free inspection and quote.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
Lead roofing uses sheet lead as the roof covering itself, rather than only as flashing at a wall or chimney. A lead bay roof, canopy or small flat roof needs carefully designed support, joints and drainage. Repair or replacement starts with the whole detail, including the timber and ventilation beneath the metal.
The inspection considers the roof shape, existing lead, joints, edges and any signs of water entering below. Access to concealed timber may be needed to establish the full repair scope. Replacement lead work is set out around appropriate bay sizes, support and movement details, with drainage and abutments planned as part of the same covering. The written quotation should explain which lead and timber sections are included.
Flashing weatherproofs a junction, such as the meeting between tiles and a wall. A lead roof covers an entire small roof surface and has to manage water across that surface as well as at its boundaries. The roof shape, sheet layout and support affect how it performs. Extending a strip of flashing across a bay does not turn it into a properly detailed roof.
For chimney aprons, soakers and wall junctions without replacement of a whole lead covering, see lead flashing replacement. This page concerns lead bays, canopies and flat lead coverings, keeping the two scopes clear when you compare quotations or describe a leak.
Lead expands and contracts with temperature changes. If the sheet layout or fixing prevents movement, stress can build around corners, joints or fixings. Splits may recur when a patch covers the visible crack but leaves the original restraint in place. The useful question is not just where the hole is, but why the metal failed there.
Water can also enter through a failed abutment, badly formed drip, open joint or inadequate drainage detail. Soft timber beneath the lead can leave the covering poorly supported. Internal condensation needs distinguishing from rain entry, particularly where the underside of the covering or its support has limited ventilation.
A lead bay roof needs a firm, appropriately detailed deck and compatible separation beneath the metal. Corners and changes of level require particular care because they concentrate movement and direct water towards joints. Sheet thickness and layout are chosen for the application; using heavier lead alone does not correct a poor roof detail.
The roof needs sufficient fall and properly formed outlets or edges to shed rain. Junctions with the wall, the window below and adjacent coverings should be considered together. If the wider bay has damaged timber, glazing junctions or a different covering, our bay window roof repair page explains that broader assessment.
A local repair may be worth considering where the surrounding lead, support and layout remain sound. Several splits, poorly arranged joints or underlying decay suggest that repairing one point will not address the whole fault. Replacement provides an opportunity to correct the layout and support rather than repeat the same vulnerable detail.
Retaining sound adjoining sections can keep work focused, but new and old metal still need a suitable junction. Ask the inspection to distinguish a temporary patch from a repair designed around the cause. A photograph of a stain indoors is useful context, although it does not locate the entry point by itself.
Tell us whether the roof covers a bay window, porch canopy or another small roof, and whether earlier patches are visible from the ground. The quote should set out the lead covering, supporting timber work, abutment details and access arrangements. If concealed damage is possible, ask how it will be assessed before additional work is agreed.
Roof height, shape, edge complexity, sheet layout and deck condition affect the scope more than surface area alone. Safe access is part of planning the work; do not climb onto a bay or canopy to inspect it. Ground-level photographs can show the overall shape without placing weight on a potentially weakened roof.
Yes. Lead roofing forms the main covering of a bay, canopy or small roof. Lead flashing seals junctions such as walls and chimneys. The sheet layout, support and drainage requirements differ.
A local repair may be suitable if the adjoining lead, deck and layout are sound. Recurring splits or several failed details need assessment of the underlying cause before choosing repair or replacement.
Lead expands and contracts as temperatures change. Sheet layout, joints and fixings need to accommodate that movement rather than restrain it and concentrate stress at one point.
The roof shape, lead specification, joint and edge details, timber condition and access affect the quotation and programme. Concealed deck damage can change the scope, so it should be discussed before work begins.
Tell us about your roofing job and we'll get back to you as soon as possible.