Adding a Roof Window: What's Involved

A roof window transforms a dark loft or landing. The detail that decides whether it leaks is the flashing kit.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

Fitting a roof window means cutting through the covering, the membrane and usually at least one rafter. Done properly it is a clean, one-day job on most roofs. Done badly, it becomes a permanent leak in the most awkward place possible.

Here is what a correct installation involves and what you should be asked about beforehand.

Structure and opening size

Windows are sized to fit between rafters wherever possible, because that avoids structural alteration. Where a wider window is wanted, a rafter is cut and trimmed with headers to carry the load. That is normal work but should be specified, not improvised.

The flashing kit is not optional

Every roof window is supplied with a flashing kit matched to the covering — one for slate and low-profile tiles, another for deep-profile tiles. Using the wrong kit, or forming a detail in mortar or sealant instead, is the most common cause of leaks around roof windows.

  • Correct flashing kit for the covering profile
  • Membrane cut and dressed to the frame, not just slit
  • Insulation collar where the window serves a heated room
  • Internal lining finished square so condensation does not collect

Regulations and glazing

Roof windows serving habitable rooms have requirements around thermal performance, and in some cases means of escape. Glazing options range from standard double glazing to laminated, obscured and solar-control units. Where the window is above a stair or is out of reach, consider an electric or solar-operated opener at the outset — retrofitting is harder.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

Do I need planning permission for a roof window?

Roof windows that sit close to the plane of the roof are often permitted development, but conservation areas, listed buildings and front elevations have restrictions. Check locally before ordering.

Will it need scaffolding?

Many installations can be completed without full scaffolding, depending on the pitch, height and access. We confirm this at survey.

Why does my existing roof window leak at the top?

Usually a failed or incorrectly fitted head flashing, or debris built up behind the window blocking the drainage path around it.

Related services