How to Tell Whether Your Lead Flashing Needs Replacing

Lead flashing lasts a long time, but when it fails the leak often appears some distance from the cause. These are the signs to look for.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

Lead flashing needs replacing when it is cracked or split, has lifted away from the wall or chimney, has come out of the mortar joint it is tucked into, or has thin, patched or sealant covered sections. Damp on a chimney breast or a ceiling next to a wall after rain is often the first sign indoors.

You can check a lot from the ground with binoculars or from a window. What you cannot see is whether water is already getting behind it, which is why a closer look is worth it once any of these signs appear.

Signs you can see from outside

  • Splits or cracks in the lead, especially at folds and corners
  • Lead that has lifted or bowed away from the brickwork
  • Mortar missing from the joint where the top edge is tucked in
  • Sections covered in mastic or tape, which usually hides an old failure
  • Stepped flashing on a chimney side with gaps between the steps
  • Green or white staining on the brickwork below the flashing

Signs inside the house

A damp patch on the chimney breast, often higher up or in the loft, is the classic sign of failed chimney flashing. A damp line on a ceiling where a lean to or extension meets the house points to the wall abutment. Because water runs along timbers before it drips, the stain can be a surprising distance from the fault, so it pays to trace it rather than guess.

Why lead fails

Lead expands and contracts with temperature. When pieces are too long, too thin or fixed too tightly, that movement causes fatigue cracks over the years. More often, the lead itself is sound but the mortar holding the top edge into the wall has crumbled, letting the flashing work loose. Storms and roofers walking on old flashing also take their toll.

Repair or renew?

If the lead is sound and only the pointing has failed, it can be re-dressed and re-pointed. If it is cracked, thin or has been patched repeatedly, it should be renewed in properly sized pieces, with the top edge wedged and pointed into the joint. Sealant is only ever a short term measure.

Where lead is a theft risk or a particular detail suits it, there are also lead alternatives, which we explain in a separate guide.

Chimney flashing in particular

Chimneys have several pieces of flashing working together: the apron at the front, stepped flashings on the sides and a back gutter behind. Failure in any one lets water in. When we renew chimney flashing we also check the pointing and flaunching on the stack, because there is little point in new lead on a chimney that lets water in higher up.

What you can safely check yourself

From the garden, a pair of binoculars will show you most chimney and wall flashings. Look along the top edge for gaps in the mortar, at the corners for splits and at the steps on a chimney side for pieces that have slipped. In the loft, check around the chimney and along any wall where a lower roof meets the house for damp timber or stains after rain.

Please do not go up a ladder onto the roof to check. Old tiles and slates break easily underfoot, and flashing faults are easy for us to confirm with the right access.

What renewing flashing involves

The old lead is removed and the joint it sat in is raked out. New lead is cut to properly sized lengths so it can move without cracking, dressed to the shape of the roof and the wall, and the top edge is tucked into the joint, wedged and pointed. On a chimney the apron, steps and back gutter are renewed in order so each piece laps the one below. Where tiles or slates have to be lifted to reach the flashing, they are refixed afterwards. We photograph the finished work so you can see it without climbing up yourself.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

How long does lead flashing last?

Well fitted lead lasts many decades. It usually fails because of fatigue cracking or failed pointing rather than simply wearing out.

Can lead flashing be repaired instead of replaced?

Yes, if the lead is sound and only the pointing or fixing has failed. Cracked or repeatedly patched lead should be renewed.

Is sealant a proper fix for flashing?

No. It can buy time, but it cracks and peels, and it often hides the real fault.

Will you check the chimney at the same time?

Yes. We check the pointing, pots and flaunching, and photograph what we find.

Related services