My Roof Line Dips. Should I Be Worried?

The difference between a century of gentle settlement and something moving now, and what each one needs.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

Almost every old Welsh roof has some waviness in it. Timber creeps, mortar settles and a hundred winters leave a line that is not quite straight. That on its own is not a fault.

What matters is whether the movement is finished or still happening, and this guide is about telling those two apart before spending anything.

What causes a roof to sag

Sagging is a structural symptom, so the cause is always below the covering rather than in it.

  • Rotten rafter feet where a leaking gutter has soaked the eaves for years
  • A decayed wall plate, so the rafters have nothing solid to bear on
  • Purlins that are undersized or have deflected over decades
  • Struts or braces removed during a loft conversion or for storage space
  • Heavier covering added later than the roof was designed for, such as concrete tiles over an old slate structure
  • Spread at the eaves, where the roof pushes the walls outward and the ridge drops

Old settlement or active movement

Old settlement is smooth, even and matches what neighbouring houses of the same age look like. If an old photograph shows the same line, you are looking at history.

Active movement is local, sharper and comes with company: fresh cracks in the plaster near the ceiling line, doors upstairs starting to bind, a stepped or twisted ridge, a gutter that has changed its fall, and daylight or fresh timber damage in the loft.

Checks you can do safely

From across the road, sight along the ridge and along the eaves and compare against the neighbours. Then from inside the loft on a dry day, look at the rafter feet where they meet the wall, look for dark, soft or crumbling timber, and look for any strut that has clearly been cut.

Do not go onto the roof, and do not load the loft up further while you are wondering about it.

How it gets put right

The repair is specific to the cause. Rotten rafter ends are cut back and new timber sistered alongside. A failed wall plate section is renewed. Purlins are propped or upsized, and removed bracing is reinstated. Where a roof has spread, restraint has to be dealt with before the covering goes back.

Because the covering must come off over the affected area, this work is very often done as part of a new roof, since the access and the strip out are the expensive parts and there is no sense paying for them twice. Where movement is significant we will say plainly that a structural engineer should specify the repair rather than a roofer guessing at it.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

Can a sagging roof collapse?

It is rare, and old even settlement is generally stable. Fresh, local or accelerating movement is the version to take seriously and get looked at without waiting.

Will a mortgage survey flag it?

Roof line deflection is a standard note on surveys. Having a roofer's written inspection ready stops the question stalling a sale.

Do the tiles have to come off?

For rafter foot and wall plate work, yes, over that area. Some purlin support can be done from inside the loft alone.

Is it covered by insurance?

Sudden storm or impact damage often is. Long term timber decay and original underspecification are not, though we document either way so you can ask.

What does a repair like this cost?

It depends entirely on how much timber is involved and how much covering has to come off, so it is quoted after inspection rather than estimated blind.

Related services