Insulation keeps heat in. Ventilation keeps moisture out. A roof needs both to work.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
Moisture is produced constantly inside a house, and some of it always finds its way upwards. In a properly ventilated loft it is carried away. In a sealed one it condenses on the coldest surface it can reach — the underside of the roof.
Ventilation is cheap when it is designed in and awkward when it is retrofitted, which is why a re-roof is the natural point to get it right.
Air enters low at the eaves and leaves high at the ridge, moving continuously across the underside of the roof. Insulation stuffed tight into the eaves blocks the inlet, which is one of the most common causes of a damp loft in an otherwise sound house.
Traditional bitumen felt is a vapour barrier: moisture that reaches it condenses and runs. A breathable membrane allows water vapour to pass outwards while remaining weathertight, which substantially changes the moisture behaviour of the loft. It is standard on modern re-roofs.
A breathable membrane is not a licence to seal the loft completely — ventilation requirements still apply and depend on the specific build-up.
Where re-roofing is not planned, over-fascia vents, soffit vents, tile vents and ridge vents can all be added. The right combination depends on the roof type and where airflow is currently being blocked.
Tell us about your roofing job and we'll get back to you as soon as possible.
In a cold-roof loft, generous cross-ventilation is rarely the problem; blocked inlets almost always are. What matters is that insulation at ceiling level is continuous so the ventilated space stays above it.
In most build-ups yes. The membrane changes the risk profile but does not remove the need for airflow, particularly in a converted or partially sealed roof space.
Yes — over-fascia, soffit, tile and ridge vents can all be retrofitted. We will advise which combination suits your roof.
Covering Swansea, Neath Port Talbot and West Glamorgan.