Loose Ridge Tiles and Mortar Falling From the Roof Edge

Bits of mortar in the gutter or on the path are the roof telling you its bedding has had enough.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

The direct answer. Ridge tiles along the top of a roof and verge tiles along the gable edge are traditionally held with a mortar bed. Mortar is rigid, the roof moves and weathers, and after enough years of frost and heat the bed cracks, loses its grip and starts to wash out.

This matters for two reasons, and only one of them is water. A loose ridge tile above a pavement, a driveway or a doorway is a falling object, and it is heavy. The leak risk is real too, because an open verge lets wind driven rain straight under the tiles.

How to spot it from the ground

You do not need to be on the roof to find this. Most of the signs land at your feet.

  • Sandy mortar debris in the gutter, in the gutter outlet or on the ground below the gable
  • A visible gap or dark line under a ridge tile when you look along the ridge from a distance
  • One ridge tile sitting slightly out of line with its neighbours
  • Missing mortar along the verge, so you can see the ends of the battens or the underside of the tiles
  • Plants or moss growing out of the ridge line, which means the joint is holding water
  • Rattling or movement audible from inside the loft in high wind

Why the verge matters more than it looks

The verge is the exposed edge of the roof at the gable. It has no tile beyond it to shelter it, so it takes the full force of any wind driven rain. Once the mortar goes, water gets under the tiles and onto the battens and the wall head, and the wind gets a purchase under the tile edges that it did not have before.

That is how a modest mortar problem becomes a handful of tiles lifted off in a gale. In an exposed coastal position, and much of West Glamorgan is exposed, verges wear faster than the rest of the roof and are worth checking after any serious storm.

Bedding, repointing and dry fixing

There are three honest options and they cost different amounts, so it is worth knowing what you are being quoted for.

  • Repointing: raking out the loose surface mortar and refilling. Cheapest, but it is only as good as the bed underneath
  • Rebedding: lifting the ridge or verge tiles, cleaning them, and laying them on a fresh full mortar bed
  • Dry fixing: removing the mortar entirely and fitting a mechanical dry ridge or dry verge system that clamps and screws down

Which one is right for your roof

Repointing a bed that is still sound is a sensible small job. Repointing over a bed that has already broken up is money down the drain, and it is the corner most often cut, because from the ground the two look identical when the work is finished.

Rebedding suits period and stone properties where the look of a mortar ridge matters. Dry fixing suits exposed roofs and anyone who does not want to revisit the job, because it does not rely on mortar at all and it allows the ridge line to ventilate. On a modern tiled roof in a windy spot, dry fixing is usually the better long term spend.

Safety and what to leave to us

If mortar or a tile has already fallen, keep people away from the area below it and do not park under it. Do not go up to look. Ridge and verge work is right at the edge of a roof, which is exactly where falls happen, and it needs proper access rather than a ladder leant on the gutter.

When we look at a ridge we check the whole line, not just the tile you noticed, because the bed tends to fail across a run rather than at one point. We will tell you if only part of it needs doing.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

How dangerous is a loose ridge tile?

Treat it seriously. Ridge tiles are heavy and they sit at the highest point of the roof, so keep the area below clear until it has been secured.

Is dry ridge better than mortar?

On an exposed roof, generally yes, because it does not depend on a rigid bed and it lets the ridge ventilate. On period property, a properly rebedded mortar ridge may suit the building better.

Can the ridge just be repointed?

Only if the bed beneath is still sound. Pointing over a broken bed looks fine from the ground and lets go again within a few years.

How do I know the verge mortar is failing?

Look for sandy debris in the gutter and on the ground at the gable end, and for gaps along the edge where you can see the battens or the underside of the tiles.

Should this be done before a storm season rather than after?

Where you have a choice, yes. A verge or ridge that is already loose is the part of the roof most likely to be lifted by a gale, and the repair is smaller before that happens.

Related services