Most flat roof failures start at an edge, an upstand or an outlet — not in the middle of the field.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
Flat roofs get a poor reputation they do not entirely deserve. Modern systems are reliable when the deck is sound, the falls clear water and the detailing at the edges is done properly. When they leak, it is usually one of a small number of predictable faults.
Here is how to recognise each of them, and which ones can be repaired without replacing the whole roof.
Standing water that has not cleared a day or two after rain means the falls have been lost, usually through deck deflection or a blocked outlet. Ponding does not itself cause a leak, but it accelerates the ageing of any covering and finds every weakness.
Where the flat roof meets a house wall, the covering must turn up and be flashed properly into the brickwork. A covering simply glued to the render, or held with a bead of mastic, will let go. This is the most common leak point on extension and dormer roofs.
Blisters are trapped moisture or air below the covering; they are a warning sign rather than an immediate leak. Splits along a seam on an older felt roof, or at a trim junction, admit water directly and can often be repaired locally if the surrounding covering is still sound.
Tell us about your roofing job and we'll get back to you as soon as possible.
Yes, where the fault is localised and the deck below is dry. Patching a roof whose deck has already taken on water simply moves the problem along.
Cold weather makes older coverings brittle and opens up hairline splits, and lower sun means ponded water sits for longer. Both make an existing weakness show itself.
They are different systems and are not always compatible for patching. The right repair material depends on what is already there, which is why an inspection comes first.
Covering Swansea, Neath Port Talbot and West Glamorgan.