Not every blister leaks, but every blister tells you something about how the roof was built and how it is ageing.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
Blistering in a felt roof or a roof coating is trapped air or moisture expanding in warm weather. A few small, firm blisters that are not cracked are usually harmless and can be watched. Blisters that are split, soft, spreading or sitting in a wet area need repairing, because once the surface cracks water gets in.
Straight answer. A blister in a felt roof is a pocket of air or moisture trapped between layers, or between the felt and the deck, that has expanded in the sun. It is not water sitting on top of the roof and it is not usually a hole, at least not yet.
Whether it matters depends on where it is and whether the surface has split. An intact blister in the middle of a field of felt is worth monitoring. A blister at a seam, a lap or an upstand is a repair job, because that is where the felt has the least material to lose.
Felt roofs are built in bonded layers. Anything that stops one layer sticking properly to the next, or gets trapped underneath, becomes a blister the first hot day the roof sees.
Liquid roof coatings blister for the same basic reason felt does: moisture underneath. If a coating is painted over a damp surface, or over an old covering that already has water in it, the sun turns that moisture to vapour and lifts the coating in bubbles.
That is why coating a tired felt roof rarely lasts. The coating is only as good as what is under it, and if the old felt is already holding water the blisters come back. Where the deck is dry and sound a proper repair can work; where it is wet the answer is a new covering.
We treat blisters in three groups when we inspect a felt roof, and we will show you which group yours falls into.
Please do not lance a blister with a knife to let the air out. All that does is turn a sealed fault into an open one, and the split will run further than the cut. Do not walk on the roof in hot weather either, as warm felt is soft and takes damage from a heel far more easily than you would expect.
Painting a blistered roof with a liquid coating is the other common mistake. The coating follows the shape of the blister, cures, and then cracks along the same line the felt would have cracked along anyway.
A local repair means cutting the blister out cleanly, drying the deck below, checking the boarding is still sound, then bonding in a patch and a cap sheet with generous overlaps so water crossing the repair never meets an upstand edge.
Where blisters have appeared across the whole roof, patching becomes false economy. At that point the honest options are a new covering over a checked deck, or a change of system. We would rather quote you for the right one than sell you three patches in three years.
Tell us about your roofing job and we'll get back to you as soon as possible.
Almost always because it was applied over a damp or already failing surface. The trapped moisture expands in the sun and lifts the coating.
Small areas over a dry deck can. Widespread blistering usually means the covering underneath is wet and needs replacing.
Not necessarily. An unbroken blister is still a waterproof surface. It is a warning about the bond, and it becomes a leak once the crown splits.
No. Cutting it turns a closed fault into an entry point for water. If it needs opening, it needs patching properly at the same time.
Trapped air and moisture expand in heat, so the blister rises on hot days and relaxes when the roof cools. The fault is there all year.
A single blister on a sound roof is a straightforward patch. Widespread blistering usually means the bond has failed generally and a new covering is the better spend.
Sometimes it points to laying in damp conditions, but plenty of blisters are simply age, or vapour from the room below with no vapour barrier. We will tell you which we think it is.
Covering Swansea, Neath Port Talbot and West Glamorgan.