Both are good systems. They fail in different ways, and they suit different roofs.
Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.
When a flat roof needs replacing, the choice is usually between EPDM rubber and GRP fibreglass. Torch-on felt remains a valid third option, particularly on larger areas, but these two dominate domestic work.
The right answer depends on the shape of the roof, whether anyone will walk on it, and the weather at the time of installation.
EPDM is supplied as a single sheet, so a typical garage roof can be covered with no field seams at all. It stays flexible through temperature swings, which suits decks that move. It is softer underfoot and less suited to a roof used as a terrace unless it is protected.
GRP is laid wet and cures into one rigid, seamless surface with moulded trims. That rigidity makes it a strong choice for balconies and any roof that will take regular foot traffic. It needs dry conditions and reasonable temperatures to cure correctly, so installation is weather-dependent.
On flat roofs, workmanship at the edges outweighs the choice of membrane. Correct falls, a sound deck, properly formed upstands and a well-flashed abutment to the house wall determine how long the roof lasts. A well-installed felt roof outlasts a badly installed GRP one every time.
Tell us about your roofing job and we'll get back to you as soon as possible.
Both are long-life systems when correctly installed on a sound deck. Compare the manufacturer's warranty for the specific product alongside the installer's workmanship guarantee.
EPDM is more tolerant of cool conditions. GRP needs dry weather and a suitable temperature range to cure properly, so winter installation may need to wait for a settled window.
Occasional access for maintenance is fine on both. For regular use as a terrace, the system and any protective layer need specifying for that from the start.
Covering Swansea, Neath Port Talbot and West Glamorgan.