Chimney Repair and Lead Flashing Costs

Chimneys cause more leaks than any other part of a pitched roof, and the price depends almost entirely on how far down the stack the problem goes.

Call 07476 888638 for a free, no-obligation quote. Available Mon–Sun, 9am–6pm.

A chimney takes weather on five faces while the rest of the roof takes it on one. That is why the mortar goes first, why the flashings work loose, and why so many ceiling stains sit in the room below a stack.

Chimney work is priced in stages, from resealing the flashing to taking the stack down and rebuilding it. Knowing which stage yours needs is the difference between a sensible price and paying for work the chimney did not need.

The stages of chimney work

Work usually falls into four bands. Renewing the flashings only. Renewing the flaunching and rebedding the pot. Repointing the exposed brickwork. Taking the stack down to the roof line and rebuilding it. Each stage costs more than the last, and each one needs the same access, which is why a roofer should tell you if the next stage up is close.

  • Flashing renewal: apron, soakers, side flashing and back gutter in Code 4 or Code 5 lead
  • Flaunching renewed and pot rebedded
  • Repointing the exposed stack in a suitable mortar mix
  • Partial or full rebuild above the roof line, reusing sound bricks where possible
  • Capping and venting a disused stack so it stays dry

Why lead, and which code

Lead is used because it moves. A roof and a chimney expand and contract at different rates, and lead absorbs that movement for decades. Code 4 is standard for soakers and side flashings, Code 5 for back gutters and larger sheets that take more water and more movement.

Cement fillets and self-adhesive flashing tape are the two things we are most often called back to. Both look tidy on the day. Both are rigid or thin, both crack at the joint that has to move, and both are a false economy on a stack you can only reach with scaffolding.

What drives the price

Height and access dominate. A stack on a bungalow gable is a different job from a stack in the middle of a three storey terrace roof. After that it is the amount of lead, the condition of the brick, and whether the pot and flaunching need renewing at the same time.

If scaffolding is going up, price everything the chimney needs in one visit. Coming back for the flaunching after the flashings are done means paying for access twice.

Want a professional to handle it?

Get Your Free, Personalised Quote

Tell us about your roofing job and we'll get back to you as soon as possible.

No spam, no obligation. We'll get back to you as soon as possible.

Free Inspections
Fast Response
Reliable Workmanship
West Glamorgan Coverage

Questions

Can you just seal around the chimney?

We can, and it will fail. Sealant and cement fillets do not tolerate the movement between a stack and a roof. Properly dressed lead does, which is why it is the only thing we fit as a permanent repair.

Do I need to rebuild the whole chimney?

Only if the brickwork above the roof line has broken down. Very often repointing plus new flaunching and flashings gives another long stretch of life at a fraction of the cost.

What about a chimney we no longer use?

It still needs weathering. A disused stack can be capped with a vented cowl so rain stays out and the flue can still breathe, which prevents damp staining in the rooms below.

Will the work be guaranteed?

Yes, in writing, with the code of lead and the mortar mix stated on the quote.

Is chimney work covered by insurance?

Storm damage often is, gradual mortar decay is not. We photograph the stack before and after so any claim is assessed on evidence.

Related services